💧 How Does Aeratelle™ Compare by PPM (TDS)?
Filtered by Carbon Fiber. Elevated by Oxygen. Protected by UV.
Not all water tastes the same — and ppm tells you why. TDS (total dissolved solids), measured in parts per million, is the mineral “signature” that shapes mouthfeel and flavor.
Our local tap comes in around 87 ppm. After the Aeratelle™ CF + DO + UV process, we land in the 75–80 ppm sweet spot — crisp, balanced, and easy to drink all day.
📊 Popular Waters by Approx PPM
| Brand | Approx PPM (TDS) | Taste Profile |
|---|---|---|
| Aquafina | 1–2 | Ultra-pure, almost no taste |
| Dasani | 28 | Very light, neutral |
| SmartWater | 36 | Vapor-distilled, light + electrolytes |
| Voss (Still) | <45 | Clean, crisp, minimalist |
| Icelandic Glacial | ~52 | Light, slightly sweet |
| Pure Life | 66–92 | Purified with minerals, slightly fuller |
| Aeratelle™ | 75–80 | Crisp, oxygenated, balanced |
| Arrowhead Spring | ~129 | Balanced, light mineral |
| Fiji Water | 210–230 | Silky, soft mineral |
| Evian | ~345 | Smooth, mineral finish |
| Perrier (Sparkling) | ~475 | Bold, mineral-rich |
| San Pellegrino (Sparkling) | ~1,100+ | Heavy mineral, effervescent |
| Gerolsteiner (Sparkling) | ~2,500+ | Extremely mineral-dense |
Note: PPM values vary by bottling run and region. These ranges are for consumer comparison, not lab certification.
🌊 Where Aeratelle™ Fits
At 75–80 ppm, Aeratelle™ sits between ultra-pure waters (which can taste “flat”) and heavy mineral waters (which can feel “thick”). The result is a clean, bright sip with enough body to feel satisfying — without the heaviness.
🛡️ Why Our Carbon Filtration Is Different
- Dual carbon stages: A primary deep carbon tank removes chlorine, chloramine, odors, and VOCs; a secondary carbon filter polishes taste.
- UV purification: Neutralizes microbes that carbon alone can’t address — without adding chemicals.
- Closed-loop cycling: Water is continuously moving, filtering, oxygenating, and chilling, so it never goes stale in storage.
- Industrial residue reduction: Activated carbon can reduce certain chemical byproducts (e.g., some VOCs, pesticides, petroleum compounds). For heavy metals or full PFAS removal, other technologies are required; Aeratelle™ focuses on taste, freshness, and everyday purity.
CF + DO + UV — a triple-clean system built for modern tap water and everyday drinking.
✨ PPM Isn’t the Whole Story
- DO (Dissolved Oxygen): Gentle aeration restores the freshness lost in pipes, giving water that “alive” feel.
- UV Safety: Purity without chemicals.
- Chilled Circulation: Constant motion + cold storage keeps flavor consistent from first pour to last.
Bottom line: Tap at ~87 ppm goes in. Aeratelle™ at 75–80 ppm comes out — cleaner, crisper, and perfectly balanced.
💧 Ready to Taste It?
Aeratelle™ — 75–80 ppm. Right where water feels alive. Tap the link in bio or DM us to try it.
⚠️ Intellectual Property Notice
Aeratelle™ Water — including the name, purification process, branding language, and overall concept — is the original intellectual property of Chester Taylor-Gray Jr., established on July 14, 2025.
All rights are reserved. This includes (but is not limited to):
- The coined term Aeratelle™
- The CF + DO + UV triple-clean process
- Related taglines, descriptions, and visual identity
- Any written, digital, or physical content associated with the concept
Respect the originality. Protect the process.
Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.